| Fingerprint Sensor Module
FSMU0041 |
|
|
|
|
|
| For
PC integrators who offer their own mechanical design, our Fingerprint Sensor
Modules are the perfect solution. For low quantities from several hundreds
to several thousands, it is also the most cost-efficient solution since
the electrical design already has been optimized for CE and ESD requirements.
The modules can directly be connected to USB and then have access to a
multitude of PC software solutions. For own software applications various
SDKs are available, all ahead our BioIDENTICA® SDKs which even
allow to mix various different sensor devices. |
|
| Additionally, the "TCESC4K"
fingerprint module can be operated as an all-in-one stand-alone solution
capable of performing all the necessary functions to capture, enrol, and
compare fingerprints. The system is fully calibrated and ready for field
deployment with all required external circuitry. |
|
| The fingerprint sensor module
FSMU0041 offers full backward hardware compatibility to its predecessor
FSMU0040.
It shows many improvements such as additional interfaces, additional memory
and superior robustness. Software compatibility is ensured by our BioIDENTICA®
SDK with the required extension BioIDENTICA®
UPK. |
|
| Main application areas are
mechanical integration into PC devices, embedded systems, access control,
custom applications, handheld devices, PDAs, and electronic locks. |
|
|
|
Comprises sensor, processor,
and interface board |
|
|
USB 2.0 (Full-speed), UART,
and SPI interfaces |
|
|
USB power management compliant
with ACPI |
|
|
Wake-up time: <15 ms |
|
|
TCD50 with 32-bit / 144
MIPS RISC processor |
|
|
64 kB NVM available for
biometric data |
|
|
Board dimensions:
20 x 20 x 4 mm³ |
|
|
Connector
similar to Molex 51441-1293 |
|
|
Weight including sensor:
approx. 1.6 g |
|
|
Operating voltage: 3.3
V ± 0.3 V |
|
|
Operating current (active
sensor): 78 mA @ 3.3 V |
|
|
Stand-by current: 1350 µA
@ 3.3 V |
|
|
Operating temperature: -20...70°C |
|
|
Storage temperature: -40...125°C |
|
|
Humidity: 5% to 93% RH @
30°C non-condensing |
|
|
PIN ESD protection (JESD22-A114-A):
± 2 kV |
|
|
Factory calibrated |
|
|
Manufactured by UPEK |
|
|
Warranty: see Hardware
Warranty |
|
|
|
|
UPEK swipe sensor TouchStrip®
TCS4K |
|
|
Capacitive silicon CMOS
technology |
|
|
Extremely hard SteelCoat™
protective layer |
|
|
> 20 million swipes |
|
|
Sensor dimensions: 13.8
x 5.0 mm² |
|
|
Active area: 12.4 x 0.2
mm² |
|
|
Array size: 192 x 4 pixels |
|
|
Pixel raster: 50 µm |
|
|
Image resolution: up to
508 dpi |
|
|
ESD protection (EC 61000-4-2
Level 4): ± 15 kV |
| Embedded Biometric Functions |
|
|
Complete embedded fingerprint
verification possible |
|
|
Embedded fingerprint template
storage possible |
|
|
Embedded
identification for up to approx. 100 fingers |
|
|
Simple
integration into many operating systems |
|
|
|
|
Data may change without
notice
| Product
version |
Order
# |
Prices |
| Fingerprint
Sensor Module with UPEK TCS4K/TCD50 sensor |
FSMU0041 |
Contact
us |
| Fingerprint
Sensor Module with UPEK TCS4K/TCD50 sensor and BioIDENTICA®
ALU |
FSMU2041 |
Contact
us |
|
|
