Bromba Biometrics

Fingerprint-Sensormodul FSMU0050

Suchen

Navigator > Produkte > Fingerprintmodule > FSMU0050

english

Fingerprint-Sensormodul FSMU0050 The FSMU0050 is a ready-to-install fingerprint module that conforms to the US FIPS 201 specification for Single Finger Capture Devices as related to the PIV (Personal Identity Verification) program. This product enables product manufacturers to avoid the technical details associated with the assembly and calibration of this type of device, simplifying the integration of this type of fingerprint reader into their products. For low quantities from several hundreds to several thousands, it is also the most cost-efficient solution since the electrical design already has been optimized for FIPS, CE, and ESD requirements. The modules can directly be connected to USB and then have access to a multitude of PC software solutions. For own software applications various SDKs are available, all ahead our BioIDENTICA® SDKs which even allow to mix various different sensor devices. Additionally, the FSMU0050 which is equal to the "TCEFC1" fingerprint module from UPEK can be operated as an all-in-one stand-alone solution capable of performing all the necessary functions to capture, enrol, and compare fingerprints. The system is fully calibrated and ready for field deployment with all required external circuitry. General Properties Includes sensor, processor, and interface USB 2.0 interface (Full-speed) USB power management compliant with ACPI Wake-up time: <15 ms TCD50D with 32-bit 144 MIPS RISC processor 32 kB NVM available for biometric data Module dimensions: 29 x 35 x 6 mm³ Connector similar to Molex 51441-0693. Weight including sensor: 6.5 g Operating voltage: 3.3 V ± 0.3 V Operating current (fast capture): < 116 mA @ 3.3 V Suspend mode current: 1.4 mA @ 3.3 V Operating temperature: -20...70 °C Storage temperature: -40...85 °C Humidity: 5% to 93% RH @ 30°C non-condensing PIN ESD protection (JESD22-A114-A): ± 2 kV FIPS 201 compliant operation mode Connector: Molex 51441-0672 Warranty: see Hardware Warranty Sensoreigenschaften UPEK area sensor TouchChip® TCS1C Superior image quality Capacitive silicon CMOS technology Extremely hard surface coating > 2 million touches Grey scale resolution: 8-bit (256 levels) Active area: 12.8 x 18.0 mm² Array size: 256 x 360 pixels Pixel raster: 50 µm Image resolution: up to 508 dpi ESD protection (EC 61000-4-2 Level 4): ± 15 kV Embedded Biometric Functions Complete embedded fingerprint verification possible Embedded UPEK template storage possible Kompatible Software BioIDENTICA® SDK PC-Logon-Software Data may change without notice Produktversion Bestellnr. Preise Fingerprint-Sensormodul TCEFC1 von UPEK FSMU0050 auf Anfrage Fingerprint-Sensormodul TCEFC1 von UPEK mit BioIDENTICA® ALU FSMU2050 auf Anfrage

Last update: 2010-02-18

Security, privacy, disclaimer, copyright, impressum

Copyright 2003-2010 Bromba GmbH