Bromba Biometrics

Fingerprint-Sensormodul FSMU0040

Suchen

Navigator > Produkte > Fingerprintmodule > FSMU0040

english

Fingerprint-Sensormodul FSMU0040 For PC integrators who offer their own mechanical design, our Fingerprint Sensor Modules are the perfect solution. For low quantities from several hundreds to several thousands, it is also the most cost-efficient solution since the electrical design already has been optimized for CE and ESD requirements. The modules can directly be connected to USB and then have access to a multitude of PC software solutions. For own software applications various SDKs are available, all ahead our BioIDENTICA® SDKs which even allow to mix various different sensor devices. Additionally, the "TCEEA4" fingerprint module can be operated as an all-in-one stand-alone solution capable of performing all the necessary functions to capture, enroll, and match fingerprints. The system is fully calibrated and ready for field deployment with all required external circuitry. The fingerprint sensor module FSMU0040 offers full backward hardware compatibility to its predecessor FSMU0030. Software compatibility is ensured by our BioIDENTICA® SDK with the required extension BioIDENTICA® UPK. General Properties Includes sensor, processor, and interface board USB 2.0 interface (Full-speed) USB power management compliant with ACPI Wake-up time: <15 ms TCD50 32-bit / 144 MIPS RISC processor 4 kB NVM available for biometric data Board dimensions: 20 x 20 x 4 mm³ Connector similar to Molex 51441-0693. Weight including sensor: approx. 1.6 g Operating voltage: 3.3 V ± 0.3 V Operating current (active sensor): 60 mA @ 3.3 V Stand-by current: < 600 µA @ 3.3 V Operating temperature: -20...70°C Storage temperature: -40...125°C Humidity: 5% to 93% RH @ 30°C non-condensing PIN ESD protection (JESD22-A114-A): ± 2 kV Factory calibrated Manufactured by UPEK Warranty: see Hardware Warranty Sensor Properties UPEK swipe sensor TouchStrip® TCS4C Capacitive silicon CMOS technology Extremely hard surface coating > 10 million swipes Sensor dimensions: 17.7 x 6.0 mm² Active area: 12.4 x 0.2 mm² Array size: 192 x 4 pixels Pixel raster: 50 µm Image resolution: up to 508 dpi ESD protection (EC 61000-4-2 Level 4): ± 15 kV Embedded Biometric Functions Complete embedded fingerprint verification possible Embedded fingerprint template storage possible Embedded identification for up to approx. 12 fingers Simple integration into many operating systems Compatible Software BioIDENTICA® SDK PC-Logon-Software Data may change without notice Produktversion Bestellnr. Preise Fingerprint-Sensormodul mit UPEK TCS4C/TCD50 FSMU0040 auf Anfrage Fingerprint-Sensormodul mit UPEK TCS4C/TCD50 und BioIDENTICA® ALU FSMU2040 auf Anfrage

Last update: 2010-01-30

Security, privacy, disclaimer, copyright, impressum

Copyright 2003-2010 Bromba GmbH